Fiber Laser
Showing all 19 results
-
1.0µm Nanosecond Fiber Laser
Fiber laser components, Commercial lasers
The 1064nm nanosecond pulsed fiber laser is integrated with high power distributed feedback (DFB) or Fabry–Perot (FP) semiconductor laser. Utilizing pulse drive circuit and direct modulation realizes high peak power output with short pulse at ns level. The minimum pulse width is down to 0.5ns, the peak power is up to 1W, and the maximum repetition rate can excess 3MHz. The both ranges of pulse width and repetition rate are selectable. It is an ideal seed source for pulsed fiber laser designed with master oscillator power amplifier (MOPA) architecture. Besides, this nanosecond fiber laser can provide output power up to 400mW under continuous operating state. Powered via 24V DC power source, and working temperature ranges from -35 to +65℃, this fiber laser is suitable for very difficult work environments. -
1.0µm Single Mode CW Lasers
Fiber laser components, Optical communications
The 1.0µm single mode CW fiber lasers are highly integrated continuous Ytterbium-doped fiber laser system. Integrated design of all-fiber structure along with double cladding fiber pumping technology realizes high performance laser output, the output power reaches 100W, and simultaneously achieves near diffraction-limited beam quality. The 1.0µm high power CW fiber lasers adopts control system based on microprocessor, featuring stable performance, long service life and maintenance-free operation. Through a clear interface LCD on the front panel, working state including output power and temperature can be displayed in real-time, warning messages will be sent in a timely manner. -
1.0µm Ytterbium-Doped Pulsed Fiber Laser (ps/fs)
Fiber laser components, Laser components products
Based on all-fiber structure design, ytterbium-doped pulsed fiber laser is a SESAM passively mode-locked all-polarization-maintaining fiber laser. The optimally designed optical path achieves stable linear polarization picosecond laser output, which is featured by high stability and maintenance-free operation. This mode-locked fiber laser is suitable for scientific research tasks or used as seed laser for high power industrial ultrafast pulsed laser. -
1.5µm CW Lasers
Fiber laser components, Fiber laser modules
The 1.5µm CW laser is high power fiber laser, the output power of which reaches a range of 1mW~100W, and has near diffraction-limited beam quality at the same time. Utilizing control system based on microprocessor, this continuous-wave fiber laser features stable performance, long service life and maintenance-free operation. Through a clear interface LCD on the front panel, working state including output power and temperature can be displayed in real-time, warning messages will be sent in a timely manner. In addition, these fiber lasers can be provided in modular package according to your requirement, suited for system integration. -
1.5µm Nanosecond Pulsed Fiber Laser
Communication & network devices, Fiber laser modules
The nanosecond pulsed fiber laser is commonly designed with master oscillator power amplifier (MOPA) architecture. The master oscillator generates initial pulses at ns level. After pulse shaping, the single-stage or multi-stage power amplifier boosts the pulse supplied by the oscillator to achieve high power output.1550nm Nanosecond Pulsed Fiber Laser (DTS)The nanosecond pulsed fiber laser is a high power pulsed laser source based on the wavelength which is safe to human eyes. It adopts high performance narrow linewidth distributed feedback (DFB) semiconductor laser as seed source, and built-in signal generator. The multi-stage optical amplification is optimized to achieve high peak power laser output with ns level pulse width. -
1550nm Long Pulsed Single Frequency Fiber Laser, CKLIS-HP (Long Distance, Polarization Maintaining)
Laser modules and components, Fiber laser modules
Features- Eye-safe operating wavelength: 1550nm
- Single pulse energy: up to 150uJ
- Repetition rate adjusting range: 5-20kHz
- Pulse width: 100-3000ns
- Near diffraction-limited beam quality
- High polarization extinction ratio (PER)
-
1550nm Long Pulsed Single Frequency Fiber Laser, CKLIS-LP (Short Distance, Polarization Maintaining)
Laser modules and components, Fiber laser components
Features- Eye-safe operating wavelength: 1550nm
- Single pulse energy: up to 10uJ
- Repetition rate adjusting range: 5-100kHz
- Pulse width: 100-3000ns
- Single-mode output
- High polarization extinction ratio (PER)
-
1927nm Thulium Fiber Laser Source
The 1927nm Fiber Laser Module of Techwin Laser use the Master Oscillator Power-Amplifier (MOPA) structure or the direct resonator cavity structure design to achieve the high power output.The generally adopted pumps are the semiconductor or fiber lasers in the bands of 793nm and 1570nm. The output polarization can be linear or random. This laser is suitable for the applications of device testing, medical treatment, remote sensing, LiDAR and mid-infrared pumping, etc.1927nm Thulium Fiber Laser Source -
2.0µm Nanosecond Pulsed Fiber Laser
Laser components products, Fiber laser modules
The nanosecond pulsed fiber laser is commonly designed with master oscillator power amplifier (MOPA) architecture. The master oscillator generates initial pulses at ns level. After pulse shaping, the single-stage or multi-stage power amplifier boosts the pulse supplied by the oscillator to achieve high power output. We pride ourselves in our expertise and technologies in the field of nanosecond pulsed fiber laser, having deep understanding of key technologies such as pulse generating, pulse shaping, and power amplification, as well as suppression of nonlinear effects including stimulated Brillouin scattering (SBS), stimulated Raman scattering (SRS), four-wave mixing (FWM). -
CW(Continuous Wave) Single Frequency Fiber Laser Module
Laser modules and components, Fiber laser components
532nm CW Single Frequency Fiber Laser ModuleThe CW single frequency fiber laser module consists of 1064nm high power continuous wave single frequency fiber laser module and high efficiency conversion module, these two modules are connected by fiber laser. The fiber laser module can provide excellent beam quality, featuring easy operation. -
CW(Continuous Wave) Single Frequency Fiber Laser Module
Laser modules and components, Fiber laser components532nm CW Single Frequency Fiber Laser Module
The CW single frequency fiber laser module consists of 1064nm high power continuous wave single frequency fiber laser module and high efficiency conversion module, these two modules are connected by fiber laser. The fiber laser module can provide excellent beam quality, featuring easy operation. -
kHz 1.0µm Narrow Linewidth Single Frequency Fiber Laser
kHz 1.0µm Narrow Linewidth Single Frequency Fiber Laser
Fiber laser components, Fiber laser modules The CKSF-R single frequency fiber laser is a kind of ultra-low noise lasers with narrow linewidth in the low kilohertz range which is below 1 kHz. These narrow-linewidth lasers deliver ultra-low phase noise and relative intensity noise, and the side-mode suppression ratio (SMSR) is over 55dB. Besides, high-intensity package is adopted to allow that the fiber laser is applicable to various environments, ensuring stable single longitudinal mode output and free of mode-hops even under changing environmental conditions such as temperature variance, vibrating and impacting, etc. The output power is at mW level, and higher output power can be tailored to your specific needs. The wavelength is available in range of 1010-1120nm. -
kHz 1.0µm Narrow Linewidth Single Frequency Fiber Laser
Fiber laser components, Fiber laser modules
The CKSF-R single frequency fiber laser is a kind of ultra-low noise lasers with narrow linewidth in the low kilohertz range which is below 1 kHz. These narrow-linewidth lasers deliver ultra-low phase noise and relative intensity noise, and the side-mode suppression ratio (SMSR) is over 55dB. Besides, high-intensity package is adopted to allow that the fiber laser is applicable to various environments, ensuring stable single longitudinal mode output and free of mode-hops even under changing environmental conditions such as temperature variance, vibrating and impacting, etc. The output power is at mW level, and higher output power can be tailored to your specific needs. The wavelength is available in range of 1010-1120nm. -
kHz 1.5µm Narrow Linewidth Single Frequency Fiber Laser
Fiber laser components, Industrial laser solutions
The CKSF-R narrow linewidth single frequency fiber laser offers linewidth below kHz level, features ultra-low phase noise and relative intensity noise (RIN), and the side-mode suppression ratio (SMSR) is over 55dB. The output power is at mW level, and higher output power can be tailored to your specific needs. The wavelength is available in range of 1530-1575nm. The CKSF-D single frequency fiber laser is a kind of ultra-low noise fiber lasers which are designed with distributed feedback bragg grating type fiber laser technology, achieving stable linear polarization, single longitudinal mode and ultra-narrow linewidth single-frequency laser output. -
kHz 2.0µm Narrow Linewidth Single Frequency Fiber Laser
Industrial laser solutions, Fiber laser modules
2.0µm Narrow Linewidth Single Frequency Fiber Laser, CKSF-R (Table-top)The narrow linewidth single frequency fiber laser is a kind of low noise fiber lasers with output linewidth at kHz level, has ultra-low frequency noise and intensity noise, and the side-mode suppression ratio (SMSR) is over 50dB. The output power can reach 100mW, and higher output power can be provided per your specific needs. The wavelength tunable range is from 1900nm to 2050nm, e.g. 1908nm, 1940nm, 1950nm, 2004nm, 2050nm, etc. Besides, high-intensity package is adopted to allow that the fiber laser is applicable to various environments, ensuring stable single longitudinal mode output and free of mode-hops even under changing environmental conditions such as temperature variance, vibrating and impacting, etc. -
Long Pulsed Single Frequency Fiber Laser (Polarization Maintaining)
Laser modules and components, Industrial fiber lasers
The long pulsed single frequency polarization-maintaining fiber laser is a modularized pulsed fiber laser designed for long-distance coherent Doppler wind LiDAR application. Based on eye-safe operating wavelength, the fiber laser is suited for long-pulse applications, can produce a single-mode linearly polarized output. Integrated with our particularly designed single frequency narrow linewidth seed laser source, the narrow linewidth can be down to 5kHz. Utilizing the cascaded acousto-optic modulator (AOM) to produce pulse signal with high turn-off ratio, the extinction ratio can exceed 100dB. -
MHz/GHz 1.0µm Narrow Linewidth Fiber Laser
MHz/GHz 1.0µm Narrow Linewidth Fiber Laser
Fiber laser components, Industrial fiber lasers Based on a master oscillator power amplifier (MOPA) design, the narrow linewidth fiber laser is a single frequency laser which has seed laser of MHz level. Optimally designed LiNbO3 phase modulator allows spectral broadening, the linewidth of output laser is at GHz level, it is possible to modulate the linewidth by means of radio frequency (RF) signal. The low noise fiber amplifier is used to extend the output power. This fiber laser is suitable for high power narrow linewidth single frequency amplifier system, the linewidth of GHz level enables SBS threshold to be greatly increased and provides output power at the kilowatt level, applicable to coherent beam combination (CBC) and spectral beam combination (SBC) system. The core technical parameters are displayed on LCD panel and the output power is adjustable, the fiber laser is widely applied in laboratory applications for its easy operation. -
MHz/GHz 2.0µm Narrow Linewidth CW Lasers
Fiber laser components, Fiber laser modules
Based on the design of master oscillator power amplifier (MOPA) architecture or direct resonant cavity architecture, the narrow linewidth CW lasers can realize high power output ranging from milliwatt (mW) to hundred watts. The adopted pumps commonly are the semiconductor lasers or fiber lasers in waveband 793nm and 1570nm. These CW lasers come with linear polarization or random polarization, suitable for applications including device testing, medical treatment, remote sensing, LiDAR, mid-IR pumping, etc. and the wavelengths are available in 1908nm, 1940nm, 1950nm, 2004nm, 2050nm, etc. -
Mode-Locked Fiber Laser (ps/fs)
Optical communication components , Fiber laser modules
The mode-locked fiber laser is an all-polarization-maintaining fiber laser that is passively mode-locked using semiconductor saturable absorber mirror (SESAM). The optimally designed optical path achieves stable linear polarization picosecond laser output, which is featured by high stability and maintenance-free operation. This mode-locked fiber laser is suitable for scientific research tasks or used as seed laser for high power industrial ultrafast pulsed laser.
