Showing 1–16 of 77 results
-
1.0µm High Power Single Frequency Fiber Amplifier (Polarization Maintaining)
Laser modules and components, Optical Amplifiers
Designed with all-polarization-maintaining fiber laser architecture, the single frequency fiber amplifier can accomplish multi-stage optical amplification of narrow linewidth (kHz) single-frequency signals to provide high power output, achieving near diffraction-limited beam quality while maintaining high polarization extinction ratio (PER). -
1.0µm Nanosecond Fiber Laser
Fiber laser components, Commercial lasers
The 1064nm nanosecond pulsed fiber laser is integrated with high power distributed feedback (DFB) or Fabry–Perot (FP) semiconductor laser. Utilizing pulse drive circuit and direct modulation realizes high peak power output with short pulse at ns level. The minimum pulse width is down to 0.5ns, the peak power is up to 1W, and the maximum repetition rate can excess 3MHz. The both ranges of pulse width and repetition rate are selectable. It is an ideal seed source for pulsed fiber laser designed with master oscillator power amplifier (MOPA) architecture. Besides, this nanosecond fiber laser can provide output power up to 400mW under continuous operating state. Powered via 24V DC power source, and working temperature ranges from -35 to +65℃, this fiber laser is suitable for very difficult work environments. -
1.0µm Single Mode CW Lasers
Fiber laser components, Optical communications
The 1.0µm single mode CW fiber lasers are highly integrated continuous Ytterbium-doped fiber laser system. Integrated design of all-fiber structure along with double cladding fiber pumping technology realizes high performance laser output, the output power reaches 100W, and simultaneously achieves near diffraction-limited beam quality. The 1.0µm high power CW fiber lasers adopts control system based on microprocessor, featuring stable performance, long service life and maintenance-free operation. Through a clear interface LCD on the front panel, working state including output power and temperature can be displayed in real-time, warning messages will be sent in a timely manner. -
1.0µm Ytterbium-Doped Pulsed Fiber Laser (ps/fs)
Fiber laser components, Laser components products
Based on all-fiber structure design, ytterbium-doped pulsed fiber laser is a SESAM passively mode-locked all-polarization-maintaining fiber laser. The optimally designed optical path achieves stable linear polarization picosecond laser output, which is featured by high stability and maintenance-free operation. This mode-locked fiber laser is suitable for scientific research tasks or used as seed laser for high power industrial ultrafast pulsed laser. -
1.5µm CW Lasers
Fiber laser components, Fiber laser modules
The 1.5µm CW laser is high power fiber laser, the output power of which reaches a range of 1mW~100W, and has near diffraction-limited beam quality at the same time. Utilizing control system based on microprocessor, this continuous-wave fiber laser features stable performance, long service life and maintenance-free operation. Through a clear interface LCD on the front panel, working state including output power and temperature can be displayed in real-time, warning messages will be sent in a timely manner. In addition, these fiber lasers can be provided in modular package according to your requirement, suited for system integration. -
1.5µm High Power Single Frequency Fiber Amplifier (Polarization Maintaining)
Optical Amplifiers in Fiber Optic Communication System
The 1.5µm high power single frequency fiber amplifier adopts the design of all-polarization-maintaining fiber laser architecture, can accomplish multi-stage optical amplification of narrow linewidth (kHz) single-frequency signals to provide high power output and achieve near diffraction-limited beam quality while maintaining high polarization extinction ratio (PER). -
1.5µm High Power Single Frequency Fiber Amplifier (Polarization Maintaining)
Optical Amplifiers in Fiber Optic Communication System
The 1.5µm high power single frequency fiber amplifier adopts the design of all-polarization-maintaining fiber laser architecture, can accomplish multi-stage optical amplification of narrow linewidth (kHz) single-frequency signals to provide high power output and achieve near diffraction-limited beam quality while maintaining high polarization extinction ratio (PER). Combining stimulated Brillouin scattering (SBS) suppression technology and polarization maintaining technology, the high power single frequency PM fiber amplifier is capable of providing a broad selection of output power from 100mW to 100W to fulfill the needs of various applications. -
1.5µm Nanosecond Pulsed Fiber Laser
Communication & network devices, Fiber laser modules
The nanosecond pulsed fiber laser is commonly designed with master oscillator power amplifier (MOPA) architecture. The master oscillator generates initial pulses at ns level. After pulse shaping, the single-stage or multi-stage power amplifier boosts the pulse supplied by the oscillator to achieve high power output.1550nm Nanosecond Pulsed Fiber Laser (DTS)The nanosecond pulsed fiber laser is a high power pulsed laser source based on the wavelength which is safe to human eyes. It adopts high performance narrow linewidth distributed feedback (DFB) semiconductor laser as seed source, and built-in signal generator. The multi-stage optical amplification is optimized to achieve high peak power laser output with ns level pulse width. -
1.6T DR16 Tx
Features- Data Rate: 16×100 Gbps PAM4
- Wavelength: 1310 nm
- Insertion Loss of per Lane: < 5.5 dB
- Electro-Optical Bandwidth：>38 GHz
- Differential Impedance：60 ohms
- Differential Drive Voltage：3.5 Vppd
-
100G DR1 Tx
Features- Data Rate: 100 Gbps PAM4
- Wavelength: 1310 nm
- Insertion Loss of per Lane: < 4.0 dB
- Electro-Optical Bandwidth：>38 GHz
- Differential Impedance：60 ohms
- Differential Drive Voltage：3.5 Vppd
-
100G PSM4 Tx
Features- Data Rate：4×25Gbps NRZ
- Working wavelength：1310 nm
- Insertion Loss per channel：<4.5 dB
- Electro-Optical Bandwidth：>20 GHz
- Differential Impedance：100 ohms
- Differential Drive Voltage：2.0 Vppd
-
100G QSFP28 CWDM4
Features
- Compliant to the IEEE 802.3bm
- Compliant to the QSFP28 MSA
- Compliant to the CWDM4/4WDM-10 MSA
- 4×25.78 Gbps optical interface
- 4×25.78 Gbps electrical interface
- I2C interface with integrated DDM
- Link length of 2 km,10km
-
100G QSFP28 DR1
Features
- Compliant to the IEEE 802.3cd
- Compliant to the QSFP28 MSA
- 1×106.25 Gbps PAM4 optical interface
- 4×25.78 Gbps electrical interface
- I2C interface with integrated DDM
- Link length of 500m
-
100G QSFP28 LR4
Features
- Compliant to the IEEE 802.3bm
- Compliant to the QSFP28 MSA
- 4×25.78 Gbps optical interface
- 4×25.78 Gbps electrical interface
- I2C interface with integrated DDM
- Link length of 10km
-
100G QSFP28 PSM4
Features
- Compliant to the IEEE 802.3bm
- Compliant to the QSFP28 MSA
- 4×25.78 Gbps optical interface
- 4×25.78 Gbps electrical interface
- I2C interface with integrated DDM
- Link length of 500m, 2 km
- Supply voltage: 3.3 V
-
1310nm SLD Light Source
Techwin 1310nm SLD light source is designed for applications such as Fiber Optic Gyroscopes (FOG), featuring a broad spectrum and low polarization. The laser utilizes a custom butterfly package with standard single-mode fiber output, ensuring good compatibility. This series of products is widely used in Fiber Optic Gyroscopes, Fiber Optic Sensing, and other related fields.Key Features:- Low Polarization
- Broad Spectrum
- Butterfly Package (6PIN/8PIN Standard Package)
- Single Mode/Polarization Maintaining Fiber Output
