1.0µm Nanosecond Fiber Laser
Fiber laser components, Commercial lasers
The 1064nm nanosecond pulsed fiber laser is integrated with high power distributed feedback (DFB) or Fabry–Perot (FP) semiconductor laser. Utilizing pulse drive circuit and direct modulation realizes high peak power output with short pulse at ns level. The minimum pulse width is down to 0.5ns, the peak power is up to 1W, and the maximum repetition rate can excess 3MHz. The both ranges of pulse width and repetition rate are selectable. It is an ideal seed source for pulsed fiber laser designed with master oscillator power amplifier (MOPA) architecture. Besides, this nanosecond fiber laser can provide output power up to 400mW under continuous operating state. Powered via 24V DC power source, and working temperature ranges from -35 to +65℃, this fiber laser is suitable for very difficult work environments.
Description
DTS 1064nm nanosecond pulsed fiber laser is a high efficiency pulsed laser source that adopts master oscillator power amplifier (MOPA) architecture design, uses high performance narrow linewidth distributed feedback (DFB) semiconductor laser as seed source, and built-in signal generator. The multi-stage optical amplification is optimized to achieve high peak power laser output with ns level pulse width. These lasers are powered via 5-12V DC power supply.
- Wavelength 1064nm
- Peak power is up to 1W
- Output isolation
- High stability and high reliability
- High precision ACC and ATC control circuit
- Seed source of pulsed fiber laser
- LiDAR
- Laser distance measurement and sensing
- OTDR
- Nonlinear studies
- Eye-safe operating wavelength: 1064nm
- Peak power output: 60W
- Repetition rate adjusting range: 1kHz-1MHz
- Pulse width: 1ns-250ns
- Near diffraction-limited beam quality
- DC power supply, modular package
- Distributed temperature sensing (DTS) system
- Fiber optic sensing
- LiDAR
- Remote sensing surveying
- Free space communication
- Other scientific research tasks
Related products
-
MHz/GHz 1.0µm Narrow Linewidth Fiber Laser
MHz/GHz 1.0µm Narrow Linewidth Fiber Laser
Fiber laser components, Industrial fiber lasers Based on a master oscillator power amplifier (MOPA) design, the narrow linewidth fiber laser is a single frequency laser which has seed laser of MHz level. Optimally designed LiNbO3 phase modulator allows spectral broadening, the linewidth of output laser is at GHz level, it is possible to modulate the linewidth by means of radio frequency (RF) signal. The low noise fiber amplifier is used to extend the output power. This fiber laser is suitable for high power narrow linewidth single frequency amplifier system, the linewidth of GHz level enables SBS threshold to be greatly increased and provides output power at the kilowatt level, applicable to coherent beam combination (CBC) and spectral beam combination (SBC) system. The core technical parameters are displayed on LCD panel and the output power is adjustable, the fiber laser is widely applied in laboratory applications for its easy operation. -
2.0µm Nanosecond Pulsed Fiber Laser
Laser components products, Fiber laser modules
The nanosecond pulsed fiber laser is commonly designed with master oscillator power amplifier (MOPA) architecture. The master oscillator generates initial pulses at ns level. After pulse shaping, the single-stage or multi-stage power amplifier boosts the pulse supplied by the oscillator to achieve high power output. We pride ourselves in our expertise and technologies in the field of nanosecond pulsed fiber laser, having deep understanding of key technologies such as pulse generating, pulse shaping, and power amplification, as well as suppression of nonlinear effects including stimulated Brillouin scattering (SBS), stimulated Raman scattering (SRS), four-wave mixing (FWM). -
CW(Continuous Wave) Single Frequency Fiber Laser Module
Laser modules and components, Fiber laser components
532nm CW Single Frequency Fiber Laser ModuleThe CW single frequency fiber laser module consists of 1064nm high power continuous wave single frequency fiber laser module and high efficiency conversion module, these two modules are connected by fiber laser. The fiber laser module can provide excellent beam quality, featuring easy operation. -
1.5µm Nanosecond Pulsed Fiber Laser
Communication & network devices, Fiber laser modules
The nanosecond pulsed fiber laser is commonly designed with master oscillator power amplifier (MOPA) architecture. The master oscillator generates initial pulses at ns level. After pulse shaping, the single-stage or multi-stage power amplifier boosts the pulse supplied by the oscillator to achieve high power output.1550nm Nanosecond Pulsed Fiber Laser (DTS)The nanosecond pulsed fiber laser is a high power pulsed laser source based on the wavelength which is safe to human eyes. It adopts high performance narrow linewidth distributed feedback (DFB) semiconductor laser as seed source, and built-in signal generator. The multi-stage optical amplification is optimized to achieve high peak power laser output with ns level pulse width.
Reviews
There are no reviews yet.